Contact Us

Via On-line Form

Business Hours

Mon - Fri: 8:00 - 5:00

Call Us

1-360-832-8116

Proper Design of Storm System Installation Is Necessary for It to be Effective

Storm System Installation in Tacoma Washington

Storms are a part of weather systems in most of the world. They can dump a substantial amount of rain or snow in your property and lead to flooding, a saturation of the soil, waterlogging, and a constant damp environment. Something that has gained respect when dealing with construction projects. A poor storm system installation can make for unhealthy conditions for all people who live or work there. Along with stability of the structures on the property.

Storm system controls the run-off from a property

A proper storm system controls the run-off from a property. The system brings all water to a single point. Once at that point, it is directed to a retention pond or the city’s storm drain network. All stormwater is generally led to natural water bodies, be they lakes, streams, or rivers. However, some installations are designed to conserve the water and store it for further use. Whatever the disposal system decided on, your installation of a stormwater system must consider the water falling on your property. You need to control and dispose of it in the manner best suited for the structures and the neighboring properties.

Typical storm system installation

Before you start work on any storm system installation, you must first survey the catchment area from where the stormwater will gather on your property. It will not be just the water that falls on it, but often from surrounding areas, especially if they are open and not inhabited. Suppose other well-developed areas surround your property. In that case, each abutting plot will likely have taken care of its stormwater, and you only have to bother with the run-off that is on your property. Consider the highest rainfall conditions in your geographical area and the intensity and inches of rain per hour that the storms bring in. Multiply this by the property area, and you will have an idea of the amount of water that your stormwater system will have to deal with.

storm system installation project
Storm System Installation Project in Tacoma, Washington

It would be best to take into account the ground levels on your property and its natural slopes. Once evaluated, you now know precisely how you will have to position any drain or piping to collect the stormwater run-off. Open trenches are more than adequate to deal with stormwater and are easier to maintain. However, they take up a lot of room on the property. A better solution will be to decide on the lowest point or points on your property. Basically where the water accumulates on the property. That is where a catch basin should be installed. The basin is then connected with all the others through piping. Then piping leads the water to collection points from where it goes to a retention pond, river, lake, and or an ocean.

The french drain

French drains rid of stormwater as well. In this type of system, perforated pipes are laid in the ground in an alignment that intercepts run-off flow. A porous medium called pea gravel surrounds the pipes. The water will soak into this medium, enter the pipe’s perforations, and then led to the final disposal point.

A certified professional must decide final disposal points for the water in advance before you start the installation. Disposal points include trenches, retention ponds, detention ponds, city storm systems, rivers, ponds, lakes, and oceans.

Swick and Son have been installing drainage systems since the 1980’s. Giving them the experience to do the job right.